* All metal structure, shockproof and impact resistant
* Hand wheel
* Button switch, line control switch two control methods
* 220 lumens high brightness LED
* Use 3 V CR123A battery or rechargeable battery 3.7 v
* Laser level: Class 3R
* Laser power: 5 mW
* Laser wavelength: 530-540nm
* Power supply: 3 W
* Weight 180g
* Size: 86x70x42mm
* Battery Model: 3V CR123A (not included)
1. unscrew the battery cover, insert the battery into the battery barrel in the correct direction and tighten the battery cover.
2. Adjust the bracket screw, flashlight and laser head forward, and secure the product holder to the rail through the connection.
3. if necessary, press the button on the switch, the corresponding flashlight or laser will light, press the button again to turn off; one or two can be lit separately
4. if you need to use the remote control switch, insert the remote control switch plug into the remote control switch socket, press the corresponding key button as required, then gently squeeze the remote control switch, then the corresponding to laser / flashlight is individually or simultaneously Bright: Loosen the remote control switch, the laser / flashlight is Off
5. Laser beam direction adjustment: press the switch button to illuminate the laser, and rotate the two adjustment handwheels as needed to adjust the laser beam direction up and down and left and right.
1. If the battery is too low, the laser / flashlight will not be lit properly, and a new battery product will need to be replaced.
2. Remove the battery when not in use for a long time.
Do not expose the laser or flashlight to your eyes as this can cause eye damage!